Ricoh B089 - Original Feed Drive

Auto Reverse
Document
Feeder
B386
ORIGINAL FEED DRIVE
SM 10-27 B386
4.9 ORIGINAL FEED DRIVE
First remove the rear cover. Then follow the instructions below for each part
replacement:
DF Feed Clutch
1. Replace the DF feed clutch [A] (1 E-ring, 1 connector).
Pick-up Solenoid
1. Replace the pick-up solenoid [B] (3 screws, 1 snap ring, 1 connector).
Transport Motor
1. Remove the bracket [C] (2 screws).
2. Replace the transport motor [E] (2 screws, 1 connector).
DF Feed Motor
1. Remove the bracket [C] (2 screws).
2. Replace the DF feed motor [D] (2 screws, 1 connector).
B386R202.WMF
[A]
[B]
[C]
[D]
[E]