Ricoh B089 - Mb Memory (G)

OPTIONAL BOARDS AND DIMMS
SM 3-63 B089/B093
Installation
7. Before using the printer/scanner features, connect the copier to a power source,
switch it on then execute SP5801 9 Memory Clear – Scanner Applications.
8. Do not connect the parallel cable now. Turn the machine on and check Copier
SP mode SP5-907: Plug & Play Name
9. Print out the configuration page to confirm correct installation of the printer
controller (User Tools> Printer Settings> List Test Print> Config. Page)
10. To connect the parallel cable, switch the machine off, connect the cable, then
switch the machine on again.
11. Execute SP5801 10 (Net File Memory Clear).
3.20.3 128 MB MEMORY (G331)
CAUTION
Unplug the main machine power cord before starting the following
procedure.
1. Remove the machine rear cover and controller board cover. ("3.20.1)
2. Install the memory DIMM [A] on the controller board.
B577R105.WMF
[A]