OPTIONAL BOARDS AND DIMMS
B089/B093 3-62 SM
Printer/Scanner Module ROM DIMM Installation
CAUTION
Unplug the main machine power cord before starting the following
procedure.
1. Remove the machine rear cover and controller board cover. ("3.20.1)
2. Install the scanner/printer ROM DIMM [A] into the lower slot [B] on the
controller board.
3. Install the 128 MB Memory DIMM G331. ("3.20.3)
4. Install the HDD unit. ("3.20.4)
5. Install the NIB. ("3.20.5)
6. Install the interface option.
NOTE: Only one slot is available for an interface option. You can install only
one printer interface option at a time: File Format Converter (B519),
IEEE 1394 (G336), IEEE 802.11b (B515), USB 2.0 (B525-01), or
Bluetooth (G354). Refer to the sections below for details about how to
install each optional interface.
B577R109.WMF
[B]
[A]
To Next Page
Loading...
