Ricoh B089 - Relay Clutch Replacement

RELAY CLUTCH REPLACEMENT
A860/B390 8-16 SM
3.4 RELAY CLUTCH REPLACEMENT
1. Remove the rear cover [A] (4 screws).
2. Remove the right cover [B] (2 screws).
3. Remove the snap ring [C].
4. Remove the bushing [D].
5. Remove the stopper bracket [E] (2 screws).
6. Replace the relay clutch [F] (1 connector).
B390R102.WMF
B390R101.WMF
[B]
[A]
[C]
[D]
[E]
[F]