1,000 Sheet
Finisher
B408
DIP SWITCH SETTINGS
SM 17-9 B408
3. SERVICE TABLES
3.1 DIP SWITCH SETTINGS
The DIP switch should not be set to any combination other than those described in
the table below.
SW100
12
Description
0 0 Normal operation mode (Default)
1 0 Packing mode.
• Before packing the machine, do the following: Set switch 1 to 1
then back to zero. The lower tray moves to the lowest position.
Then turn off the main switch.
• After unpacking the machine, do the following: After turning the
main switch back on, the lower tray returns to home position
automatically.
To Next Page
Loading...
