OPTIONAL BOARDS AND DIMMS
SM 3-69 B089/B093
Installation
3.20.7 IEEE 802.11B INTERFACE KIT (B515)
Accessories
Check the accessories and their quantities against the following list:
Description Q'ty
1. IEEE 802.11b Board ..............................................................1
2. PCI Card................................................................................1
3. Antennas ..............................................................................2
4. Velcro pads ...........................................................................2
CAUTION
Unplug the main machine power cord before starting the following
procedure.
NOTE: To install this option, the Printer/Scanner Option must be installed first.
("3.20.2) Only one slot is available for the interface option. You can install
only one printer interface option at a time: File Format Converter (B519),
IEEE 1394 (G336), IEEE 802.11b (B515), USB 2.0 (B525-01), or Bluetooth
(G354).
1. Remove the machine rear, controller board cover, and middle knockout.
("3.20.1)
2. Remove the slot cover [A] ( x 2). Save these screws
3. Attach the IEEE 802.11b Board [B] to the controller board.
NOTE: Make sure that the jumper at TB1 is set on the left at 3,
4.
4. Fasten the board with the screws [C] removed in Step 2.
B515R103.WMF
3
4
B515R900.WMF
[A]
[B]
[C]
To Next Page
Loading...
