Ricoh B089 - Tray Cover Replacement; Tray Cover Attachment; Tray Cover Removal

TRAY COVER REPLACEMENT
B313/B459 13-6 SM
3. REPLACEMENT AND ADJUSTMENT
3.1 TRAY COVER REPLACEMENT
3.1.1 TRAY COVER REMOVAL
1. Remove the tray cover [A] by pressing on the two pawls [B] on the left side of
the cover.
3.1.2 TRAY COVER ATTACHMENT
NOTE: The right side of the tray cover should be attached first.
1. Fit the pawls [C] (just below the cover fin) around the thin bar [D] on the shift
tray.
2. Align the square [E] so that it fits into the groove in the underside of the tray
cover and does not interfere with the attachment of the cover.
3. Complete the attachment by inserting the left side pawls [B] into place.
B459R101.WMF
[A]
[B]
[C]
[D]
[E]