LCT
A862/B391
RIGHT TRAY SIDE FENCE
SM 9-9 A862/B391
1.5 RIGHT TRAY SIDE FENCE
When the paper in the right tray is used up, the side fence solenoid [F] activates
and stays on until the side fence open/closed sensor [E] detects that the fence is
open. The rear fence [A] then moves the stack of paper from the left tray into the
right tray, as described in the following section. When the stack has been
transferred to the right tray, the rear fence return sensor [G] detects the rear fence
and then the cpu turns off the side fence open solenoid (closing the side fence).
The side fence open/closed sensor [D] detects when the side fence is closed.
When it is not closed, the user is prompted at the operation panel to free the
mechanism.
1.6 LEFT TRAY REAR FENCE
If the right tray paper end sensor detects that there is no paper in the tray (while
the left tray sensor detects that there is still paper in the left tray), the right side
fence [C] opens and the rear fence motor [H] turns on. The rear fence of the left
tray moves and the paper stack is then transferred from the left tray to the right
tray.
When the left tray rear fence activates the rear fence return sensor, the machine
detects that the paper stack has been transferred to the right tray and the rear
fence motor rotates in the opposite direction. When the rear fence HP sensor [B]
comes on, the motor stops.
B391D109.WMF
[A]
[B]
[C]
[D]
[E]
[F]
[G]
[H]
To Next Page
Loading...
