Ricoh B089 - Page 198

OPTIONAL BOARDS AND DIMMS
B089/B093 3-64 SM
3.20.4 HDD (B592)
Accessories
Check the accessories and their quantities against the following list:
Description Q'ty
1. HDD..................................................................................... 1
2. Bracket ............................................................................... 1
3. Shoulder Screws ................................................................. 4
4. Screws ................................................................................ 3
5. Connector Cable ................................................................. 1
CAUTION
Unplug the main machine power cord before starting the following
procedure.
1. Remove the machine rear cover and controller board cover. ("3.20.1)
2. Attach the HDD [A] to the bracket [B] ( x 4 shoulder screws).
3. Attach one end of the connector cable [C] to the HDD.
4. Attach the other end of the connector to CN516 [D] on the controller board.
5. Fasten the bracket with the HDD attached to the controller board [E] ( x 3).
B577R106.WMF
[A]
[B]
[C]
[E]
[D]