FAX OPTION TYPE 2027 INSTALLATION
B576 1-4 SM
8. If the ADF has been installed, insert the stamp cartridge [A] into the ADF as
shown.
9. Connect the telephone line to the “LINE” jack at the rear of the machine.
10. Plug in the machine and turn on the main power switch.
NOTE: The copier must be connected to a properly - grounded socket outlet.
11. Be sure to set the clock. (Date and time)
12. Enter service mode and program the serial number into the fax unit (Fax SP-3-
102-000). The serial number can be found on the serial number label (attached
to the machine in Step 6).
B576I552.WMFWMF
[A]
To Next Page
Loading...
