FAX OPTION TYPE 2027 INSTALLATION
SM 1-3 B576
Fax Option
B576
4. Turn on the battery switch (SW1) [A] on the MBU board, then attach the FCU
unit [B] ( x 6). Connect harnesses [C], then clamp harness [D] as shown.
Replace the rear cover and the small cover.
5. Remove parts [E], [G] and [J], then install parts [F], [H] and [I].
6. Affix the FCC decal [K] and the serial number decal [L] on the rear cover as
shown. Then install the small cover [M] on the rear cover.
7. Affix the super G3 decal [N] as shown.
B576I505.WMF
B576I607.WMF B576I108.WMF
B576I106.WMF
[A]
[C]
[B]
[D]
[L]
[K]
[M
[N]
[E]
[F]
[G]
[H]
[I]
[J]
To Next Page
Loading...
