Ricoh B089 - Page 206

OPTIONAL BOARDS AND DIMMS
B089/B093 3-72 SM
10. Transmission Speed. Press the Next button to display more settings, then
select the transmission speed for the mode: Auto, 11 Mbps, 5.5 Mbps, 2 Mbps,
1 Mbps (default: Auto). This setting should match the distance between the
closest machine or access point, depending on which mode is selected.
NOTE: For the Ad Hoc Mode, this is the distance between the machine and
the closest PC in the network. For the Infrastructure Mode, this is the
distance between the machine and the closest access point.
11 Mbps 140 m (153 yd.)
5.5 Mbps 200 m (219 yd.)
2 Mbps 270 m (295 yd.)
1 Mbps 400 m (437 yd.)
11. To initialize the wireless LAN settings, use page 2/2. Press Execute to initialize
the following settings:
• Transmission mode
• Channel
• Transmission Speed
• WEP
• SSID
• WEP Key
SP Mode Settings for IEEE 802.11b Wireless LAN
The following SP commands can be set for IEEE 802.11b
SP No. Name Function
5840 4 SSID Used to confirm the current SSID setting.
5840 6 Channel MAX
Sets the maximum range of the channel settings for the
country.
5840 7 Channel MIN
Sets the minimum range of the channels settings
allowed for your country.
5840 10 WEP Key Used to confirm the current WEP key setting.
5840 11 WEP Key Select Used to select the WEP key (Default: 00).
5840 20 WEP Key Select
Used to display the maximum length of the string that
can be used for the WEP Key entry.