OPTIONAL BOARDS AND DIMMS
B089/B093 3-74 SM
USB SP Settings
The following SP commands are available. However, only one setting may require
adjustment and this setting should be performed only if the customer is
experiencing USB data transmission errors.
NOTE: Do not change the settings marked “DFU”. These settings are for design
and factory use only.
SP No. Name Function
Adjusts the USB transfer rate. Do not change the
setting unless there is a data transfer error using
the USB high speed mode.
HS/FS:
High speed/Full speed auto adjust
(480Mbps/12Mbps)
5844 1 Transfer Rate
FS: Full speed (12Mbps fixed)
5844 2 Vendor ID Displays the vendor ID. DFU
5844 3 Product ID Displays the product ID. DFU
5844 4 Dev. Release Number
Displays the development release version
number. DFU
To Next Page
Loading...
