SERVICE PROGRAM MODE
B089/B093 4-56 SM
Border Remove Area Switching 5923*
Toggles between two settings that affect the appearance of the pages for border
removal and printed facing pages: (1) Using the original area as the allotted area,
or (2) Using only the copy paper as the allotted area.
[0 = Original base, 1 = Copy base]
0: Original area used as base
1: Copy used as the base
Copy Server: Set Function 5967
Enables the document server function. This is a security feature. If you set this SP
to 1, the machine disables the use of the document server and removes all image
data from the temporary area on the HDD.
[0~1 / 0 / 1]
0: Enables. Document server can be used.
1: Disables. Document server cannot be used.
Cherry Server Selection 5974*
Switches writing between the Scan Router V2 Lite application provided and the
optional full version.
0: Lite, 1: Full
5990 SMC Printout (SMC Report)
5990 1 All (Data List)
5990 2 SP (Mode Data List)
5990 3 User Program
5990 4 Logging Data
5990 5 Diagnosis Report
5990 7 NIB Summary
5990 8 Capture Log
5990 21 Copier User Program
5990 22 Scanner SP
5990 23 Scanner User Program
Prints all of the system parameter lists for the item
selected. (☛ 4.2.6) Input the number for the item
that you want to print, then press “Execute” on the
touch panel.
5995 Factory Mode
DFU
5996
Machine State DFU
5996 1
Destination Shows intended destination of the engine board.
0: Japan
1: North America
2: Europe
3: Mainland China
4: Taiwan
5996 2
SBCU ID
Displays the CPM information for the engine
board. For example, 22 (22 cpm), 27 (27 cpm),
and so on.
5996 3
IPU ID Displays the IPU ID (presently fixed at “32”).
Rev. 06/2004
To Next Page
Loading...
