SERVICE PROGRAM MODE
B089/B093 4-62 SM
Total Jams by Location 7 504*
These SPs display the total number of paper jams by location. A “Check-in”
(paper late) error occurs when the paper fails to activate the sensor at the
precise time. A “Check-out” (“paper lag”) paper jam occurs when the paper
remains at the sensor for longer than the prescribed time
.
7 504 1 At power on
7 504 3 Upper relay sensor (Lag)
7 504 4 Lower relay sensor (Lag)
7 504 5 Vertical transport sensor (Late) (optional bank)
7 504 6 Relay sensor (Late) (optional LCT)
7504 7 By-pass Non-Feed
7504 10 Duplex Non-Feed
7 504 11 Registration sensor (Late)
7 504 12 Paper exit sensor (Late)
7 504 13 Bridge relay sensor (Late)
7 504 14 Bridge exit sensor (Late)
7 504 15 Duplex entrance sensor (Late)
7 504 16 Duplex exit sensor (Late)
7 504 17 1 bin tray exit sensor (Late)
7 504 20 Finisher entrance sensor
7 504 21 Finisher shift tray exit sensor
7 504 23 Finisher staple tray paper sensor
7 504 24 Finisher stack feed-out belt HP sensor
7 504 26 Finisher paper taking out
7 504 27 Finisher drive error
7 504 28 Finisher tray lift error
7 504 29 Finisher jogger drive error
7 504 30 Finisher tray shift drive error
7 504 31 Finisher stapler error
7 504 32 Finisher stack-feed out error
7 504 33 Finisher feed out error
7 504 34 Finisher no response
7 504 53 Transport Sensor 1 (Off Check)
7 504 54 Transport Sensor 2 (Off Check)
7 504 55 Transport Sensor 3 (Off Check)
7 504 56 LCT Relay Sensor (Off Check)
7 504 57 U Relay Sn (Lag) from Bypass
7 504 61 Registration sensor (Lag)
7 504 62 Paper exit sensor (Lag)
7 504 63 Bridge relay sensor (Lag)
7 504 64 Bridge exit sensor (Lag)
7 504 65 Duplex entrance sensor (Lag)
7 504 66 Duplex exit sensor (Lag)
7 504 67 1 bin tray exit sensor (Lag)
To Next Page
Loading...
