EasyManua.ls Logo

Ricoh B089 - Page 294

Ricoh B089
849 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SERVICE PROGRAM MODE
B089/B093 4-78 SM
8 211 T:Scan PGS/LS
8 212 C:Scan PGS/LS
8 213 F:Scan PGS/LS
8 215 S:Scan PGS/LS
8 216 L:Scan PGS/LS
These SPs count the number of pages
scanned into the document server .
[0~9999999/ 0 / 1]
The L: counter counts the number of pages
stored from within the document server
mode screen at the operation panel, and
with the Store File button from within the
Copy mode screen
Reading user stamp data is not counted.
If a job is cancelled, the pages output as far as the cancellation are counted.
If the scanner application scans and stores 3 B5 sheets and 1 A4 sheet, the S:
count is 4.
If pages are copied but not stored on the document server, these counters do not
change.
If both sides of 3 A4 sheets are copied and stored to the document server, the C:
count is 6 and the L: count is 6.
If you enter document server mode then scan 6 pages, the L: count is 6.
ADF Org Feeds [0~9999999/ 0 / 1] 8 221
These SPs count the number of pages fed through the ADF for
front and back side scanning.
8 221 1 Front Number of front sides fed for scanning:
With an ADF that can scan both sides simultaneously,
the Front side count is the same as the number of pages
fed for either simplex or duplex scanning.
With an ADF that cannot scan both sides simultaneously,
the Front side count is the same as the number of pages
fed for duplex front side scanning. (The front side is
determined by which side the user loads face up.)
8 221 2 Back Number of rear sides fed for scanning:
With an ADF that can scan both sides simultaneously,
the Back count is the same as the number of pages fed
for duplex scanning.
With an ADF that cannot scan both sides simultaneously,
the Back count is the same as the number of pages fed
for duplex rear-side scanning.
When 1 sheet is fed for duplex scanning the Front count is 1 and the Back count
is 1.
If a jam occurs during the job, recovery processing is not counted to avoid double
counting. Also, the pages are not counted if the jam occurs before the first sheet
is output.

Table of Contents

Related product manuals