SERVICE PROGRAM MODE
B089/B093 4-96 SM
TX PGS/Port [0~9999999/ 0 / 1] 8 701
These SPs count the number of pages sent by the physical port
used to send them. For example, if a 3-page original is sent to 4
destinations via ISDN G4, the count for ISDN (G3, G4) is 12.
8 701 1 PSTN-1
8 701 2 PSTN-2
8 701 3 PSTN-3
8 701 4 ISDN (G3,G4)
8 701 5 Network
RX PGS/Port [0~9999999/ 0 / 1] 8 741
These SPs count the number of pages received by the physical port
used to receive them.
8 741 1 PSTN-1
8 741 2 PSTN-2
8 741 3 PSTN-3
8 741 4 ISDN (G3,G4)
8 741 5 Network
Dev Counter [0~9999999/ 0 / 1]
8 771
These SPs count the frequency of use (number of rotations of the
development rollers) for black and other color toners.
Note: For machines that do not support color, the Black toner count
is the same as the Total count.
8 791 LS Memory Remain
This SP displays the percent of space
available on the document server for
storing documents.
[0~100/ 0 / 1]
Toner Remain [0~100/ 0 / 1]
8 801
This SP displays the percent of toner remaining for each color. This
SP allows the user to check the toner supply at any time.
Note:
• This precise method of measuring remaining toner supply
(1% steps) is better than other machines in the market that
can only measure in increments of 10 (10% steps).
• This SP is expanded for color MFP and color LP machines.
For this machine, the count is done for black only.
To Next Page
Loading...
