Ricoh B089 - Page 317

SERVICE PROGRAM MODE
SM 4-101 B089/B093
Service
Tables
Reading
Number Bit Description
0 1
7 Wake up Signal Not detected Detected
6 Lower Relay Sensor Activated Deactivated
5 Vertical Transport Sensor
(Optional paper tray unit)
Activated Deactivated
4 3rd Tray Paper Size Activated Deactivated
3 4th Tray Paper Size Activated Deactivated
2 Motor Lock (Optional paper tray
unit)
Not locked Locked
1 Height Sensor (Optional paper
tray unit)
Activated Deactivated
4
0 Unit Set (Optional paper tray
unit)
Unit set Unit not set
7 Fusing Drive Release Solenoid Activated Deactivated
6 Main Motor Brake Signal Not active Active
5 Main Motor On Signal Activated Deactivated
4 Main Motor Rotation Direction
Signal
Not active Active
3 3rd Paper End Sensor Paper End Paper is present
2 4th Paper End Sensor Paper End Paper is present
1 3rd Paper Height Sensor Deactivated Activated
5
0 4th Paper Height Sensor Deactivated Activated
7 Duplex Unit Set Unit set Unit not set
6 Total Counter Not detected Detected
5 By-pass Tray Unit Set Detected Not detected
4 By-pass Paper End Sensor Paper End Paper is present
3 By-pass Paper Size 2 Activated Deactivated
2 By-pass Paper Size 1 Activated Deactivated
1 By-pass Paper Size 4 Activated Deactivated
6
0 By-pass Paper Size 3 Activated Deactivated
7 Not Used
6 Not Used
5 Not Used
4 Not Used
3 Key Counter Set Detected Not detected
2 Key Card Set Detected Not detected
1 Polygon Motor Ready Signal Ready Not ready
7
0 Not Used