SCANNER UNIT
SM 6-9 B089/B093
Replacement
Adjustment
20. Secure the 1st scanner with the scanner wire pins.
21. Install the tension spring [A] to the tension bracket.
22. Tighten the tension bracket [B].
23. Secure the scanner wire pulley [C] (1 Allen screw).
24. Remove the positioning tools [D]. After sliding the scanner to the right and left
several times, re-install the positioning tools to check the scanner wire bracket
and tension bracket again.
25. Reassemble the scanner and do the scanner and printer copy adjustments (!
6.8).
B027R011.WMF
[B]
[C]
[D]
[A]
To Next Page
Loading...
