LASER UNIT
SM 6-11 B089/B093
Replacement
Adjustment
6.2.2 LASER UNIT
WARNING
Turn off the main power switch and unplug the machine before attempting
this procedure. Laser beam can seriously damage your eyes.
1. Remove the optional finisher/bridge unit, and either the tray for the optional 1-
bin tray unit or optional shift tray, if these units have been installed.
2. Remove the upper front cover [A] (1 screw, 1 hook).
3. Remove the front cover [B] (2 pins).
4. Remove the inner cover [C] (5 screws).
5. Remove the copy tray [D] (1 hook [E]).
6. Remove the toner bottle holder [F].
7. Remove the laser unit [G] (2 screws, 2 connectors).
8. After reassembling the machine, do the scanner and printer copy adjustments.
(! 6.8)
B027R101.WMF
B027R102.WMF
B027R103.WMF
[A]
[B]
[D]
[C]
[E]
[F]
[G]
To Next Page
Loading...
