Ricoh B089 - Page 371

FUSING/EXIT
SM 6-17 B089/B093
Replacement
Adjustment
6.5 FUSING/EXIT
6.5.1 FUSING UNIT
CAUTION
Allow time for the unit to cool before doing the following procedure.
1. Release the duplex unit, if it has been installed, and open the right cover.
2. Remove the fusing unit [A] (2 screws).
6.5.2 THERMISTORS
1. Remove the fusing unit. (! 6.5.1).
2. Remove the plates [A] (1 screw each).
3. Replace the thermistors [B] (1 connector).
B027R501.WMF
B022R551.WMF
[A]
[A]
[B]
[A]
[B]