SPECIFICATIONS
SM 1-3 B089/B093
Overall
Information
NOTE:
Measurement Conditions
1) Not APS mode
2) A4/LT copying
3) Full size
Warm-up Time: Less than 10 seconds (20°C, 68°F) from Wen the
operation switch is turned on.
Less than 15 seconds (20°C, 68°F) from Wen the main
switch is turned on.
B089/B0
93
Less than 4.9 sec. (A4), less than 5.0 sec.
(LT)
First Copy Time:
B097 Less than 4.5 sec. (A4/LT)
Measured under the following conditions:
• Wen the polygonal mirror motor is spinning.
• From the 1st paper tray
• Not APS mode
• Full size
Copy Number Input: Ten-key pad, 1 to 99 (count up or count down)
Manual Image Density: 7 steps
Paper Tray Capacity: Paper Tray: 500 sheets x 2
(Special paper in the 2nd paper tray: 50 sheets)
Paper Tray Unit (Option): 500 sheets x 2
LCT (Option): 1000 sheets x 2
By-pass Tray (Option): 100 sheets
(A4, B5, A5, B6, 81/2" x 11", 51/2" x 81/2")
10 sheets (A3, B4, 11" x 17", 81/2" x 13")
1 sheets (non-standard sizes)
NOTE: Copy paper weight: 80g/m
2
(20 lb)
Toner Replenishment: Cartridge exchange (360 g/cartridge)
Toner Yield: 11 k copies (A4 sideways, 6% full black, 1 to 1 copying,
ADS mode)
Copy Tray Capacity: Copy Tray: 500 sheets (without 1-bin tray)
250 sheets (with 1-bin tray)
Memory Capacity: Standard 64 MB, Optional memory 128 MB
To Next Page
Loading...
