Paper Tray
Unit
A860/B390
SIDE AND END FENCES
SM 8-13 A860/B390
1.6 SIDE AND END FENCES
Side Fences
If the tray is full of paper and it is pushed in strongly, the fences may deform or
bend. This may cause the paper to skew or the side-to-side registration to be
incorrect. To correct this, each side fence has a stopper [A] attached to it. Each
side fence can be secured with a screw [B], for customers who do not want to
change the paper size.
End Fence
As the amount of paper in the tray decreases, the bottom plate [C] lifts up
gradually. The end fence [D] is connected to the bottom plate. When the tray
bottom plate rises, the end fence moves forward and pushes the back of the paper
stack to keep it squared up.
B390D110.WMF
B390D109.WMF
[A]
[D]
[C]
[B]
To Next Page
Loading...
