Ricoh B089 - Page 644

SERVICE PROGRAM MODE
B576 3-4 SM
3
Mode No. Function
104 003
Memory Lock
Disabled
If the customer does not want to receive
transmissions using Memory Lock on this
line, change this SP to on.
004
Transmission
Disabled
If you turn this SP on, the machine does not
send any fax messages on the G3-2 line.
105 PSTN-3 Port settings
001 Select Line
Select the line setting for the G3-3 line. If
the machine is installed on a PABX line,
select “PABX”, “PABX(GND)” or
“PABX(FLASH)”.
002 PSTN Access Number
Enter the PSTN access number for the G3-
3 line.
003
Memory Lock
Disabled
If the customer does not want to receive
transmissions using Memory Lock on this
line, change this SP to on
004
Transmission
Disabled
If you turn this SP on, the machine does not
send any fax messages on the G3-3 line.
106 ISDN Port Settings
001 Select Line
002 PSTN Access Number
003
Memory Lock
Disabled
004
Transmission
Disabled
Not used. Do not change these settings.
FAX Switches 201
001 – 032 00 – 1F
Change the bit switches for scanner
settings for the fax option
! Section 3.2 Bit Switches