ERROR CODES FOR LAN COMMUNICATION
SM 2-5 IFAX
Internet Fax
(IFAX)
Code Meaning Cause Action
15-64 TIFF Decompression
Error
The file received as an attachment
caused the TIFF decompression
error:
• The TIFF format of the attachment
is corrupted.
• Software error.
• Ask the sender to check that
the attachment was sent in
correct TIFF format.
• If the problem persists, update
the software.
15-71 Not Binary Image Data The file could not be received
because the attachment was not
binary image data.
Ask the sender to check the
content of the attachment.
15-73 MDN Status Error Could not find the Disposition line in
the header of the Return Receipt, or
there is a problem with the firmware.
Ask the sender to resend the
mail. If the problem persists,
update the firmware.
15-74 MSDN Message ID
Error
Could not find the Original Message
ID line in the header of the Return
Receipt, or there is a problem with
the firmware.
Ask the sender to resend the
mail. If the problem persists,
update the firmware.
15-80 Mail Job Task Read
Error
Could not receive the transmission
because the destination buffer is full
and the destination could not be
created (this error may occur when
receiving a transfer request or a
request for notification of reception).
No action required. When
destinations are used and a
space opens in the buffer, the
transmission will be received.
15-81 Repeated Destination
Registration Error
Could not repeat receive the
transmission because the destination
buffer is full and the destination could
not be created (this error may occur
when receiving a transfer request or
a request for notification of
reception).
No action required. When
destinations are used and a
space opens in the buffer, the
transmission will be received.
15-91 Send Registration Error Could not receive the file for transfer
to the final destination:
• The format of the final destination
or the transfer destination is
incorrect.
• Destinations are full so the final
and transfer destinations could not
be created.
• As the send to check both the
transfer destination and the
final destination.
• When destinations open, the
transmission will be received.
15-92 Memory Overflow Transmission could not be received
because memory overflowed during
the transaction.
• Expand SAF memory.
• Ask the sender to break up the
file and send the parts
separately.
15-93 Memory Access Error Transaction could not complete due
to a malfunction of SAF memory.
Initialize memory. If the problem
persists, replace the MBU.
15-94 Incorrect ID Code The machine rejected an incoming e-
mail for transfer request, because the
ID code in the incoming e-mail did
not match the ID code registered in
the machine.
• Ask the sender to correct the
ID code.
• Set IFAX SW03 Bit 3 to “1”.
15-95 Transfer Station
Function
The machine rejected an incoming e-
mail for transfer because the transfer
function was unavailable.
Inform the transfer requester that
this machine does not support the
transfer station function.
To Next Page
Loading...
