INTERNET MAIL COMMUNICATION
IFAX 4-16 SM
The fields of the e-mail and their contents are as follows:
Field Content
From E-mail address of the requesting terminal
To Destination address (Transfer Station address)
Bcc Backup mail address
Subject From TSI (Fax Message No. xxxx)
Content-Type
Multipart/mixed
Text/Plain (for a text part), image/tiff (for attached files)
Content-Transfer-Encoding Base 64, 7-Bit, 8-bit, Quoted Printable
Mail body (text part) RELAY-ID-: xxxx (xxxx: 4 digits for an ID code)
RELAY: #01#*X#**01….
Message body MIME-converted TIFF-F.
Request by G3 Fax
The procedures are the same as for a normal G3 fax machine.
The requesting terminal dials the Transfer Station, and requests it to transfer the
message to end receivers stored as quick dials, speed dials, and group dials in the
Transfer Station.
The machine uses NSF to send an ID code and the machine telephone number.
Up to 30 end receivers can be requested.
End receiver destinations can also be selected using tone signals, in the same way
as for other recent fax models. An e-mail address can also be selected in this way,
as end receivers and as the destinations for receiving the transfer result report.
The receiving IFAX machine receives the transfer request on the PSTN
connection. It then handles the transfer request in the same way as explained in
“Request by Mail’.
LAN
Transfer
Station
E-mail
PSTN
G3 Transmission (Transfer Request)
Requesting
Terminal
G3 Transmission (Report)
G3 End Receivers
SMTP
Server
E-mail End
Receivers
IFAX
IFAX
IFAXD915.WMF
To Next Page
Loading...
