Ricoh J-P2 - Removing the High Voltage Supply Board - C, B; Psu

ELECTRICAL COMPONENTS 17 January, 2003
3-48
3.10.5 REMOVING THE HIGH VOLTAGE SUPPLY BOARD - C, B
1. Rear cover (☛ 3.3)
2. High voltage supply board [A] (! x 6, " x 12)
3.10.6 PSU
1. Left cover (☛3.3)
2. PSU [A] (! x 5, " x 11)
NOTE: Check that the interlock switches on the PSU work normally after
reinstalling the PSU (open/close the left and front doors).
G080R940.WMF
G080R941.WMF
[A]
[A]