17 January, 2003 IEEE802.11B (WIRELESS LAN)
6-99
Detailed
Descriptions
Troubleshooting steps
If there are problems using the wireless LAN, check the following.
1) Check the LED indicator on the wireless LAN card.
2) Check if “IEEE802.11b” is selected in the UP mode LAN Type in Network
Setup in the Host Interface menu.
3) Check if the channel settings are correct.
4) Check if the SSID and WEP are correctly set.
If infrastructure mode is being used,
1) Check if the MAC address is properly set
2) Check the communication status.
If the communication status is poor, bring the machine closer to the access point.
Additionally check for any obstructions between the machine and the access point.
If the problem cannot be solved, try changing the channel setting.
To Next Page
Loading...
