Ricoh J-P2 - Printing Mode and Black LD Unit Position

17 January, 2003 LASER EXPOSURE
6-25
Detailed
Descriptions
Printing Mode and Black LD Unit Position
The machine changes the main scan resolution between 600 and 1,200 dpi for
black and white printing by rotating the LD unit, except for OHP sheets and thick
paper (remains at the 600 dpi position).
The table lists the printing modes and the positions of the black LD unit.
Mode Position
600 dpi 600-dpi position
Monochrome
1,200 dpi 1,200-dpi position
600 dpi 600-dpi position
Color
1,200 dpi 600-dpi position
After the laser optics housing unit has been replaced, the beam pitch for 600 dpi
and 1,200 dpi must be adjusted (SP2-109-2, -3).