Ricoh J-P2 - Cf Expander; Accessories Check List; CF Expander Installation

OPTIONAL UNIT INSTALLATION 17 January, 2003
1-24
1.6.4 CF EXPANDER
NOTE: This section shows the procedure for installing the Copier Feature
Expander in a machine equipped with the optional rack. For the procedure
for installing the rack, see section 1.6.3.
Accessories Check List
Description Q'ty
1. Scanner Unit ......................................................................... 1
2. Main Switch Cover ................................................................ 1
3. Screw (M3 x 6)...................................................................... 3
4. Screw (M3 x 6)...................................................................... 2
5. IPU Board ............................................................................. 1
6. NVRAM Board ...................................................................... 1
7. DIMM #1 (SYSTEM) ............................................................. 1
8. DIMM #2 (PRT/SCN) ............................................................ 1
9. 128 MB DIMM (for 230V only)............................................... 1
10. Pad........................................................................................ 1
11. Power Strip (for 230V only) ................................................... 1
12. Cushion................................................................................. 1
CF Expander Installation
1. Remove the controller board (! x 2) [A].
G367I203.WMF
[A]