Ricoh J-P2 - Specifications

17 January, 2003 SPECIFICATIONS
SPEC-1
Spec.
SPECIFICATIONS
1. GENERAL SPECIFICATIONS
Configuration:
Desktop
Print Process:
Dry electrostatic transfer system
Printer Languages: PCL5c
Adobe PostScript 3
RPCS (Refined Printing Command Stream)
Resolution: PCL5c:
600 x 600 dpi, 300 x 300 dpi
Adobe PostScript 3:
1200 x 1200 dpi, 1200 x 600 dpi, 600 x 600 dpi
RPCS:
1200 x 1200 dpi, 1200 x 600 dpi, 600 x 600 dpi
Gradation 1 bit/pixel
Printing speed:
Resolution Plain paper Thick/OHP
600 x 600 dpi 38 ppm 10 ppm
1200 x 600 dpi 38 ppm 10 ppm
Monochrome
1200 x 1200 dpi 28 ppm 10 ppm
600 x 600 dpi 28 ppm 10 ppm
1200 x 600 dpi 28 ppm 10 ppm
Color
1200 x 1200 dpi 14 ppm 10 ppm
Resident Fonts: PCL5c:
35 Intelli fonts
10 TrueType fonts
1 bitmap font
Adobe PostScript 3:
136 fonts (24 Type 2 fonts, 112 Type 14 fonts)
Host Interfaces: Bi-directional IEEE1284 parallel x 1 ..................... Standard
Ethernet (100 Base-TX/10 Base-T)...................... Standard
USB...................................................................... Optional
IEEE1394............................................................. Optional
IEEE802.11b (Wireless LAN) ............................... Optional
Bluetooth (Wireless)............................................. Optional
Network Protocols:
TCP/IP, IPX/SPX, NetBEUI, AppleTalk
First Print Speed: Color: 9 seconds or less (from tray 1)
Monochrome: 7 seconds or less (from tray 1)
Warm-up Time
Less than 99 seconds (at 23°C/50%)