17 January, 2003 DIP SWITCHES
5-109
Service
Tables
5.12 DIP SWITCHES
Controller Board
DIP SW No. OFF ON
1
Boot-up from flash
ROM
Boot-up from IC card
2 to 4 Factory Use Only: Keep these switches OFF.
NOTE: If a download attempt failed, you must boot up the machine from the IC
card. To do this, DIP SW 1 on the controller board needs to be ON.
BCU Board
DIP SW No. OFF ON
1 to 3 Factory Use Only: Keep these switches OFF.
4 Factory Use Only: Keep this switch ON.
To Next Page
Loading...
