Ricoh J-P2 - Printer Engine Service Mode

PRINTER ENGINE SERVICE MODE 17 January, 2003
5-12
5.4 PRINTER ENGINE SERVICE MODE
5.4.1 SERVICE MODE TABLE
The printer engine service mode is displayed as follows:
• “2. Engine”.......Without the optional CF expander
• “Copy SP” ........With the optional CF expander
SP1-XXX (Feed)
1
Mode No.
(Class 1, 2, and 3)
Function / [ Setting ]
[Lead Edge Reg.] Leading Edge Registration
(Paper Type, [Color ], Process Speed), Paper Type -> N: Normal, OHP, TH: Thick
1 N [K] 62.5 *BCU
2 N [K] 125 *BCU
3 N [K] 185 *BCU
4 N [FC] 62.5 *BCU
5 N [FC] 125 *BCU
6 TH [K] *BCU
7 TH [FC] *BCU
8 O H P [ K ] *BCU
001
9 O H P [ F C ] *BCU
Adjusts the leading edge registration by changing
the registration clutch operation timing for each
mode.
[ -10.0 to 10.0 / 0.0
/ 0.1 mm/step ] FA
[S-to-S Reg.] Side-to-Side Registration
1 By-pass Table *BCU
2 Paper Tray 1 *BCU
3 Paper Tray 2 *BCU
Adjusts the side-to-side registration by changing
the laser main scan start position for each mode.
[ -10.0 to 10.0 / 0.0
/ 0.1 mm/step ] FA
4 Paper Tray 3 *BCU
5 Paper Tray 4 *BCU
002
6 Duplex *BCU
[ -10.0 to 10.0 / 0.0
/ 0.1 mm/step ]
[Paper Buckle] Paper Buckle
(Paper Tray or By-pass, Paper Type, Process Speed), Paper Type: N: Normal, TH: Thick
1 P 62.5 *BCU
2 P 125 *BCU
3 P 185 *BCU
4 B N 6 2 . 5 *BCU
5 B N 1 2 5 *BCU
6 B N 1 8 5 *BCU
7 B T H *BCU
003
8 B OHP
*BCU
Adjusts the amount of paper buckle at the
registration roller by changing the paper feed
timing.
[ -10 to 10 / 0
/ 1 mm/step ]