IMAGE TRANSFER AND PAPER SEPARATION 17 January, 2003
6-64
ACS (Auto Color Sensing) Mode
The machine can print in the color or monochrome mode (selected with the printer
driver). In color mode, ACS can be switched on or off with a user tool (default: on).
If ACS is on, the transfer belt stays in the default position (against the K drum only)
until a page with color data on it appears. The transfer belt then moves against all
four drums and stays there until the end of the job, even if some K only pages
appear.
If ACS is off and the color mode is selected, all data is printed with the transfer belt
positioned against all four drums. The belt does not move even if a K only page
appears, even if it is at the start of the job.
Color Developing
ACS: On
K developing
K K
Color Color
K K
Color Developing
ACS: Off
K K
Color Color
K K
Color
Color
G080D964.WMF
To Next Page
Loading...
