Ricoh J-P2 - Front Cover; Left Cover and Rear Left Cover

EXTERIOR COVERS 17 January, 2003
3-6
3.3.4 FRONT COVER
1. Front cover [A] (2 pins)
3.3.5 LEFT COVER AND REAR LEFT COVER
1. Remove the optional finisher from the
printer if it is installed.
2. Remove the optional duplex inverter
unit if it is installed.
3. Connector cover [A] if the optional
duplex unit is not installed
4. Left cover [B] (! x 6)
5. Open the left door [C].
6. Rear left cover [D] (! x 3)
G080R906.WMF
G080R907.WMFFF
G080R908.WMF
[A]
[D]
[C]
[B]
[A]