Ricoh J-P2 - Paper Feed; Pick-Up, Feed, and Separation Rollers; Tray 1 and Tray 2; By-Pass Tray

17 January, 2003 PAPER FEED
3-15
Replacement
Adjustment
3.6 PAPER FEED
3.6.1 PICK-UP, FEED, AND SEPARATION ROLLERS
Tray 1 and Tray 2
1. Tray 1 and Tray 2
2. Pick-up roller [A] (1 hook)
3. Feed roller [B] (# x 1)
4. Separation roller [C] (# x 1)
By-pass Tray
1. Open the right door.
2. By-pass tray cover [A] (1 hook, ! x 1)
3. Raise the paper end sensor actuator.
4. Pick-up roller [B] (1 hook)
5. Feed roller [C] (# x 1)
6. Vertical transport cover [D] (! x 4)
NOTE: Remove the right rear
cover (☛ 3.6.4) if you
want to have easier
access to the four screws.
7. Separation roller [E] (# x 1)
G080R924.WMF
G080R925.WMF
G080R926.WMF
[A]
[C]
[A]
[B]
[B]
[C]
[E]
[D]