17 January, 2003 CONTROLLER
6-83
Detailed
Descriptions
Toner Limitation
Toner limitation prevents toner from being scattered around text or printed lines.
Maximum values have been prepared independently for text and photo. They can
be adjusted with controller SP mode (Toner Limit).
• Default: 190% for text, 260% for photo
• Adjustable range: 100% to 400%
Dither Processing and ROP/RIP
Dither patterns have been prepared for photo and text independently. Dithering
converts 8-bit data to 1-bit data. However, these dither patterns create the illusion
of 256 gradations for high quality prints. The optimum dither pattern is selected
depending on the selected resolution.
RIP: Raster Image Processing
ROP: Raster Operation
To Next Page
Loading...
