Ricoh J-P2 - Ardf; Accessories Check List; ARDF Installation

OPTIONAL UNIT INSTALLATION 17 January, 2003
1-34
1.6.7 ARDF
Accessories Check List
Description Q'ty
1. Stepped Screw ..................................................................... 2
2. Screw (M4 x 10) ................................................................... 2
3. Knob Screw .......................................................................... 4
4. Attention Decal – Scanner .................................................... 1
5. Attention Decal – Top Cover................................................. 1
6. Installation Procedure........................................................... 1
ARDF Installation
1. Attach and tighten [A] (! x 2 stud).
2. Mount the ARDF by aligning the screw keyholes [B] in the ARDF support plate
over the stud screws, and slide the ARDF toward the front of the machine.
NOTE: To avoid damaging the ARDF, hold it as shown in the illustration.
3. Secure the ARDF (! x 2 [C]).
G564I151.WMF
[A]
[B]
[C]