Ricoh J-P2 - Transfer Belt Cleaning Unit

TRANSFER AND PAPER TRANSPORT UNIT 17 January, 2003
3-22
3.7.2 TRANSFER BELT CLEANING UNIT
NOTE: After replacing the transfer belt cleaning unit, reset the maintenance
counter, SP7-804-17.
While pushing the lever, pull out the transfer belt cleaning unit [A] (! x 1).
NOTE: 1) The blade [B] may damage the belt if you do not keep pushing the lever.
2) When reassembling, check that the transfer unit release lever is put
back to the original position (☛ 3.5).
After replacing the transfer belt cleaning unit, perform forced line position
adjustment (SP5-993-002 or “Maintenance menu – Color registration - Auto Adjust”
in User Program mode).
G080R739.WMF
[A]
[B]