Ricoh J-P2 - Paper Source Selection

17 January, 2003 CONTROLLER
6-85
Detailed
Descriptions
Paper Source Selection
Tray Priority (Auto Tray Select)
The “Tray Priority” setting determines
the start of the tray search when the
user selects “Auto Tray Select” with
the driver. The machine searches
paper trays for the specified paper
size and type.
When no tray contains paper that
matches the paper size and type
specified by the driver, the controller
stops printing until the user loads the
correct paper.
The “Tray Priority” setting can be
specified in the “Paper Input” menu
(Menu/ Paper Input/ Tray Priority).
NOTE: The by-pass feed table is not
part of the tray search.
Tray Locking
If “Tray Locking” is enabled for a tray, the controller skips the “locked” tray in the
tray search process.
The “Tray Locking” setting can be specified in the “Paper Input” menu (Menu/
Paper Input/ Tray Locking).
NOTE: The by-pass feed table cannot be unlocked (Tray Locking is always
enabled).
Manual Tray Select
If the selected tray does not have the paper size and type specified by the driver,
the controller stops printing until the user loads the correct paper.
Priority Tray
Tray 1
Tray 2
LCT (Optional)
Start of
Tray Search
Tray 3 (Optional)
Tray 4 (Optional)
G080D906.WMF