REBOOT / SYSTEM SETTING RESET 17 January, 2003
5-96
Copier Setting Reset
The copy settings in the UP mode can be reset to their defaults. Use the following
procedure.
1. Press User Tools/Counter
".
2. Hold down ! and then press Copier/Document Server Settings.
NOTE: You must press ! first.
3. When the message prompts you to confirm that you want to reset the Copier
Document Server settings, press “Yes”.
4. When the message tells you that the settings have been reset, press “Exit”.
G080S503.WMF
To Next Page
Loading...
