17 January, 2003 SPECIAL TOOLS
3-1
Replacement
Adjustment
3. REPLACEMENT AND ADJUSTMENT
!CAUTION
Turn off the main switch and unplug the machine before beginning any of
the procedures in this section.
NOTE: This manual uses the following symbols.
☛ : See or refer to ! : Screw " : Connector
# : Clip ring $ : E ring
3.1 SPECIAL TOOLS
Part Number Part Name Q’ty
N8036701 Flash Memory Card - 4MB 1
G0219350 Loop-back connector - Parallel 1
C4019503 20X Magnification Scope 1
To Next Page
Loading...
