17 January, 2003 SCANNER SP
5-85
Service
Tables
5.5 SCANNER SP
5.5.1 SP MODES
SP1-xxx (System and Others)
1
Mode No.
(Class 1, 2, and 3)
Function / [Setting]
[System]
1 Model Name Displays the model name.
2
Scanner Firmware
Version
Displays the scanner firmware version.
3
Scanner Firmware
Number
Displays the firmware’s part number.
001
4 Detail Model Name
*
NV
CF
Displays the detail model name.
[Error Log Display]
002
1 Error Log Display
*
NV
CF
Displays the error log data.
[FTP Port Number]
003
1 FTP Port Number
*
NV
CF
Changes the FTP port number.
After changing this value, do the following:
1. Run the Registry Editor
2. Access
/HKEY_LOCAL_MACHINE/SOFTWARE/
Ricoh/NetworkScanner
3. Change the value of ‘PortNo’ to this SP
mode’s value
[0 to 65535 / 3670
/ 1/step ]
[Compression Type]
004
1 Compression Type
*
NV
CF
Selects the compression type for binary picture
processing.
[ 1 to 3 / 3
/ 1/step ]
1: MH, 2: MR, 3: MMR
[Erase margin]
005
1 Erase Margin
*
NV
CF
Creates an erase margin for all edges of the
scanned image.
If the machine has scanned the edge of the
original, create a margin.
[0 to 5 / 0
/ 1 mm/step ]
[Auto Reset Timer]
006
1 Auto Reset Timer
*
NV
CF
Adjusts the auto reset timer for the scanner
function.
If this is “0”, the auto reset function is disabled.
[0 to 99 / 60
/ 1 sec/step ]
To Next Page
Loading...
