Ricoh J-P2 - Vertical Transport Sensor; Right Door Unit

17 January, 2003 PAPER FEED
3-17
Replacement
Adjustment
3.6.3 VERTICAL TRANSPORT SENSOR
1. Open the right door.
2. Vertical transport cover [A] (! x 4)
NOTE: Remove the right rear cover (☛ 3.6.4) if you want to have easier
access to the four screws.
3. Vertical transport sensor [B] (" x 1)
3.6.4 RIGHT DOOR UNIT
1. Rear cover (☛ 3.3)
2. Upper rear cover (☛ 3.3)
3. Upper right cover (☛ 3.3)
4. Right rear cover [A] (! x 4)
5. Open the right door.
6. Lift the vertical transport unit [B] to remove it from its hinges (" x 3, # x 1).
G080R752.WMF
G080R927.WMF
G080R928.WMF
[A]
[B]
[A]
[B]