Ricoh J-P2 - Printer Controller Service Mode

17 January, 2003 PRINTER CONTROLLER SERVICE MODE
5-9
Service
Tables
5.3 PRINTER CONTROLLER SERVICE MODE
5.3.1 SERVICE MODE MENU
The printer controller service mode is displayed as follows:
• “1. Service” ......Without the optional CF expander
• “Printer SP”......With the optional CF expander
1
Mode No.
(Class 1 and 2)
Function / [ Setting ]
[Bit Switch]
1 Bit Switch 1
2 Bit Switch 2
3 Bit Switch 3
4 Bit Switch 4
5 Bit Switch 5
6 Bit Switch 6
7 Bit Switch 7
001
8 Bit Switch 8
*CTL Adjusts bit switch settings. DFU
[Clear Setting]
1 Clear Setting Initializes settings in the “System” menu of the
user mode.
003
2 Clear CSS Counter CF
DFU
[Print Summary]
004
1 Print Summary Prints the service summary sheet (a summary of
all the controller settings).
[Disp. Version]
005
1 Disp. Version Displays the version of the controller firmware.
[ToneCtlSet]
1 Tone (Factory)
2 Tone (Prev.)
3 Tone (Current)
*CTL
101
4 ACC CF
Recalls a set of gamma settings. This can be
either a) the factory setting, b) the previous
setting, or c) the current setting.
[ToneCtlSet]
1 *1200x1200Photo
2 600x600Text
3 1200x600Text
4 600x600Photo
102
5 1200x600Photo
Selects the printing mode (resolution) for the
printer gamma adjustment. When selecting a print
mode, an asterisk (*) is displayed in the front of
the mode.
[PrnColorSheet]
1 ToneCtlSheet
103
2 ColorChart
Prints the test page to check the color balance
before and after the gamma adjustment.
[ToneCtlValue]
1 Black 1
21 Cyan 1
41 Magenta 1
61 Yellow 1
*CTL Adjusts the printer gamma for the mode selected
in the “Mode Selection” menu.
[ 0 to 255 / 16
/ 1/step ]
2 Black 2
22 Cyan 2
42 Magenta 2
62 Yellow 2
*CTL [ 0 to 255 / 32
/ 1/step ]
3 Black 3
23 Cyan 3
43 Magenta 3
104
63 Yellow 3
*CTL [ 0 to 255 / 48
/ 1/step ]