Ricoh J-P2 - Paper Width Detection Board

PAPER FEED 17 January, 2003
3-16
3.6.2 PAPER WIDTH DETECTION BOARD
1. Open the by-pass tray.
2. Center the side fences [A].
3. By-pass tray cover [B] (! x 2, 2 hooks)
NOTE: There is a square opening [C] on each side of the tray. Insert a
screwdriver into each of the openings.
4. Paper width detection board [D] (" x 1)
NOTE: To remove the connector,
open the bottom cover [E].
G080R753.WMF
G080R755.WMF
[B]
[A]
[D]
[C]
[E]