17 January, 2003 PRINTER ENGINE SERVICE MODE
5-45
Service
Tables
SP5-XXX (Mode)
5
Mode No.
(Class 1, 2, and 3)
Function / [ Setting ]
[Language]
009
1 Language *CTL
#
Selects the language for the control panel.
[ 0 to 16 / 2 / 1/step ]
NOTE: When changing language, the main switch
has to be turned off and on to initialize the
system.
mm/inch Display 024
1 mm/inch display *CTL Display units (mm or inch) for custom paper sizes.
0: mm (Europe/Asia)
1: inch (USA)
[Counter Method]
045
1 Counter Method *CTL Selects the counting method if the meter charge
mode is enabled with SP5-930-001.
[ 0 or 1 / 0
/ - ]
0: Developments
1: Prints
NOTE: The counting method can be changed only
once, regardless of whether the counter
value is negative or positive.
[Rom Update] ROM Update Display
046
1 ROM Update *CTL Enables or disables the ROM Update utility. When
enabled, this utility will be displayed in the user
program mode.
[ 0 or 1 / 1
/- ] DFU
0: Enable
1: Disable
[Energy Saver]
3 Energy Saver 1 *CTL After the end of a job, the machine enters Energy
Saver mode (level 1) when this timer runs out.
[ 0 to 60 / 0
/ 10 sec/step ]
101
4 Energy Saver 2
(Auto OFF mode)
*CTL After the end of a job, the machine enters Energy
Saver mode (level 2) when this timer runs out.
[ 0 to 3600 / 3600
/ 60 sec/step ]
[Double Count]
104
1 Double Count *CTL Specifies whether the counter is double clicked for
A3/DLT size prints.
[ 0 or 1 / 0
/ - ]
0: Normal count
1: Double count
Data Language Data Language
0
No language
9
Norwegian
1
Japanese
10
Danish
2
English
11
Swedish
3
American
12
Polish
4
French
13
Portuguese
5
German
14
Hungarian
6
Italian
15
Czech
7
Spanish
16
Finnish
8
Dutch
To Next Page
Loading...
