TROUBLESHOOTING GUIDE 17 January, 2003
4-62
Registration roller speed adjustment (For B&W mode)
1. Input the following values in the SP modes.
SP1-004-006 = (Value of SP1-004-005)
SP1-005-002 = (Value of SP1-004-005) – 0.2%
2. Print a 2-dot pattern (pattern 12) using A3/11" x 17" paper.
SP5-997 (Test Pattern) Setting
Mode
Tray
selection
Pattern
Single
Color
Color Mode Resolution
Normal color 600 dpi 2 12 6 (Black) Single Color 600x600
3. Depending on the paper used, a horizontal band may appear at 60 mm (2.76")
from the leading edge on A3 (11" x 17") paper. If the horizontal band is
observed on the 2-dot pattern, decrease the setting of SP1-004-006 in 0.1%
steps until the problem is solved.
To Next Page
Loading...
