EasyManua.ls Logo

Ricoh J-P2 - Page 187

Ricoh J-P2
419 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17 January, 2003 ELECTRICAL COMPONENT DEFECTS
4-65
Trouble-
shooting
Component CN Condition Symptom
Open
Toner near end may not be
detected even when the toner near
end condition is satisfied.
Toner end sensor
K: 209-A2
Y: 206-A7
C: 206-A4
M: 206-A1
Shorted
Toner near end may be detected
even when the toner near end
condition is not satisfied.
Open
Drum gear
position sensor
K: 213-13
CMY: 210-B12
Shorted
SC440
Open
Waste oil near full message is
displayed.
Waste oil sensor 212-A13
Shorted
Waste oil near full message is not
displayed even when a waste oil
near full condition exists, causing a
waste oil leak.
Open
The message “Reset waste oil
bottle correctly” is displayed even
when it is set correctly.
Waste oil bottle
set sensor
212-A16
Shorted
The message “Reset waste oil
bottle correctly” is not displayed
even when it is not set correctly.
Open
Waste toner near full message is
displayed, even when a waste toner
near full condition does not exist.
Waste toner
sensor
213-A4
Shorted
Waste toner near full message is
not displayed even when a waste
toner near full condition exists,
causing waste toner leak.
NOTE: The CN numbers are the connector numbers on the BCU.

Table of Contents

Related product manuals