PRINTER ENGINE SERVICE MODE 17 January, 2003
5-50
5
Mode No.
(Class 1, 2, and 3)
Function / [ Setting ]
52
ECP Switches the ECP setting for Centronics off/on.
[ 0 or 1 / 1
/ - ]
0: Disabled, 1: Enabled
With “1” selected, SP5-828-050 must be enabled
for 1284 mode compatibility.
53
Transmission Speed
*
CTL
CF
Selects the Ethernet transmission speed.
[ 0 to 3 / 0 / 1 /step]
0: Auto
1: 10Base-T
2: 100Base-TX
3: Auto
66 HD job Clear *CTL Treatment of the job when a spooled job exists at
power on.
0: Data is cleared
1: Automatically printed
67 Job Spool (LPR) *CTL
Job spool on/off (LPR).
0: Job spool off
1: Job spool on
68 Job Spool (Protocol) *CTL
Job spool on/off (IPP).
0: Job spool off
1: Job spool on
74 Delete Password *CTL Deletes passwords.
828
80 Host Name (Ethernet) *CTL Specifies the host name.
[HDD Init.] HDD Initialization
1 HDD Init./ALL (CF) Initializes the hard disk. Use this SP mode only if
there is a hard disk error.
2 IMF CF
3 NFA CF
4 Job Log CF
5 Printer Fonts CF
832
9 Debug CF
DFU
[JobLog ON/OFF]
833
7 JobLog ON/OFF *CTL Saves the result of the jobs in the job log. If this
mode is enabled, the result is written on the HDD.
If no HDD is installed, this feature is disabled even
if this SP is set to ‘enabled’.
[ 0 or 1 / 0
/ - ]
0: Disabled
1: Enabled
[IEEE1394]
4 Device Name
DFU
7 Cycle Master
DFU
8 BCR mode
DFU
9 IRM 1394a Check
DFU
10 Unique ID
DFU
11 Logout
DFU
12 Login
DFU
839
13 Login MAX
*CTL
DFU
[IEEE 802.11b]
840
4 Current SSID *CTL Enters a unique ID (up to 32 characters long) to
identify the device when it is operating in an area
with another wireless LAN network.
To Next Page
Loading...
